Jiaojiao Ou

I am a Ph.D student in the Department of Electrical and Computer Engineering at UT Austin. I work in UTDA Lab, advised by Prof. David Z. Pan. I received the master degree of Microelectronics at Peking University in 2013 and the bachelor degree of Electronic Engineering at Tsinghua University in 2010.

Education

  • Ph.D student, ECE, The University of Texas at Austin. 2013-Present (Expected graduation: May 2018)
  • M.S., Microelectronics, Peking University, China. 2010-2013
  • B.S., Electrical Engineering, Tsinghua University, China. 2006-2010

Experience

  • ARM Inc., Austin, TX
    Silicon R&D Group Intern, 2016 Summer
  • Mentor Graphics, Austin, TX
    Research Intern, 2015 Summer
  • GLOBALFOUNDRIES, Santa Clara, CA
    Research Intern, 2014 Summer

Skills

  • Programming Languages:C/C++, Tcl, Python
  • VLSI/CAD: P&R, DFM, Lithography
  • EDA Tools: ICC, Design Compiler, Calibre

Selected Publications

  • Jiaojiao Ou, Xiaoqing Xu, Brian Cline, Greg Yeric and David Z. Pan. "DTCO for DSA-MP Hybrid Lithography with Double-BCP Materials in Sub-7nm Node", accepted by IEEE International Conference on Computer Design (ICCD), Boston, Massachusetts, Nov.5-Nov.8, 2017.
  • Jiaojiao Ou, Bei Yu, Xiaoqing Xu, Joydeep Mitra, Yibo Lin and David Z. Pan. "DSAR: DSA aware Routing with Simultaneous DSA Guiding Pattern and Double Patterning Assignment", ACM International Symposium on Physical Design (ISPD), Portland, OR, Mar. 19-22, 2017.
  • Jiaojiao Ou, Brian Cline, Greg Yeric and David Z. Pan. "Efficient DSA and DP Hybrid Lithography Conflict Detection and Guiding Template Assignment", SPIE Intl. Symp. Advanced Lithography Conference, San Jose, CA, Feb.26-Mar.2, 2017.
  • Jiaojiao Ou, Bei Yu, and David Z. Pan. "Concurrent Guiding Template Assignment and Redundant Via Insertion for DSA-MP Hybrid Lithography", ACM International Symposium on Physical Design (ISPD), Santa Rosa, CA, April 3-6, 2016.
  • Jiaojiao Ou, Bei Yu, Jhih-Rong Gao, Moshe Preil, Azat Latypov, and David Z. Pan. "Directed Self-Assembly Based Cut Mask Optimization for Unidirectional Design", ACM Great Lakes Symposium on VLSI (GLSVLSI), Pittsburg, PA, May20-22, 2015.
  • Jiaojiao Ou, Bei Yu, Jhih-Rong Gao, and David Z. Pan. "Directed Self-Assembly Cut Mask Assignment for 1D Design", Journal of Micro/Nanolithography, MEMS, and MOEMS (JM3), vol.14, no.3, 2015.
  • Xiaoqing Xu, Yibo Lin, Meng Li, Jiaojiao Ou, Brian Cline, and David Z. Pan. "Redundant Local-Loop Insertion for Unidirectional Routing", IEEE Transanctions on Computer-aided Design of Integrated Circuits and Systems. 2017
  • Bei Yu, Xiaoqing Xu, Subhendu Roy, Yibo Lin, Jiaojiao Ou, and David Z. Pan. "Design for Manufacturability and Reliability in Extreme-Scaling VLSI (invited paper)", SCIENCE CHINA Information Sciences (SCIS).

Misc

  • Concurrent Guiding Template Assignment and Redundant Via Insertion for DSA-MP Hybrid Lithography, TECHCON 2016, Austin, TX
  • Directed Self-Assembly Based Cut Mask Optimization for Unidirectional Design, TECHCON 2015, Austin, TX

Publications at Peking University

Awards and Honors

  • SPIE BACUS Scholarship, 2017
  • DAC A. Richard Newton Young Student Fellow Award, 2014