PRIMETIME

        1. Setup PRIMETIME
        2. mrgnet
        3. pt_shell

After getting the netlist file, we can running the PRIMETIME simulation.  

First open ptnopara.scp, change the last word on the first line to our design name: design.  It looks like the following:

Save this file and then quit the editor. 

In the tcsh shell,  type pt_shell

Then PRIMETIME shell will be loaded.  In the PRIMETIME shell, type source ptnopara.scp and you can see the following report:

After APR we will need to do the postparasitic extraction timing analysis.

Next-->